I notice this token shows in FW and it did on tokenscan but once it was admitted in the collection it no longer shows (the image) on Tokenscan

https://tokenscan.io/asset/KERNELISLAND

is there something i should do differently with the json to fix it?

lemme check for ya

https://i.gyazo.com/8f7f000929bc204cc9cdd8895cc2d216.jpg

there... should be showing the image now... could have been a failed download from arweave or something.... I just removed the file and downloaded it manually and pushed it up to all the servers and cleared the cache... so should be good now and show as designed

if you find any others like this, pls LMK

I sure will.. i always just assume pilot error and try to reupload

Xcp dispenser (best rate) 🔥

https://tokenscan.io/tx/83d08d4bd9f8cf2bd26998d1bc7917e3be6eade97e9d3f0b2070f862be6cebfa

Strange the token scan website comes up on my phone perfectly fine…. Thanks for the heads up. I’ll check it out tomorrow morning and make sure that both SSL certificates are up-to-date👍🏻

@jdogresorg

I don't know how to explain this but my free wallet is showing a certain amount and when I sent everything out ,he cut 5$ out of it and when I added some fund back to the wallet ,it still reflects the missing coins he cut from previous transactions ,but cant be spent even from electrum ...

It keeps deducting my coins on each transaction

Lol fake jdog at work in my dm again 😊

Are you sure that you don’t have automatic donations, turned on? If you do, I believe every 25th transaction makes a small donation to support the Wallet development.

I’ve never heard of a case where you enter an amount and then the amount changes after you send… perhaps you’re using tab to tab from the amount to the USD value field and the amount is changing slightly before you send?

No I dont have automatic donations on and I sent the usual way I've been sending all these while

very strange. Are you able to reproduce? If so... please take a screen capture / video of what you entered into the wallet and then link the transaction that was generated so I can compare... if your able to reproduce the issue, I should be able to track it down and figure out what is going on and fix it, if there is indeed an issue.

Ok

This is what's reflecting in fw

This is the balance when check the same wallet from electrum

This is Max I can send out

Still reflecting the missing coins

Looks like a different between how electrum and Freewallet are calculating balances... Freewallet gets its balances data from external services like blockcypher, blockstream, chain.so, etc.... electrum seems to get its balances internally... could be that electrum only allows you to spend outputs over a certain threshold/amount... the difference here is 807 satoshis... so could be that that 807 sats is spent in outputs that electrum deems to small to use

Can't say for sure what is going on exactly... but doesn't seem to be an issue with freewallet... also, the screenshot indicates your not using freewallet desktop... freewallet mobile hasn't been updated in a number of years and stopped working once Adam and Team forced v2 transactions to support their PSBT stuff... TLDR, make sure you use freewallet-desktop

also maby elook in electrum for some way to adjust the minimum amount of sats that elctrum will send

Should be fixed now... re-issued the SSL cert from dankest.llc 🙂

thanks for the heads up on the expired cert

Hey J how are u, bro i dm u for a issue can when uu can check it ? thanks

is it only fans?

because my wife considers that cheating

...old fashioned

yo gm. Is there another way i can close my dispensers? Freewallet hasnt been showing dispensers for a few days now

hrm... it should show dispensers which are open... are you sure your on the address where the dispenser lives?

You can manually close a dispenser by hash number in the actions menu as well

^^ this

On the Tokenscan dispenser page it will show the hash number of the dispenser..

As Jdog said as long as you are selected on the origin address of the dispenser in the 'Addresses' list where you put up the card for sale

You can then go to Actions - Close Dispenser and copy paste the hash from Tokenscan and close it manually without the "dispensers" user interface in freewallet

https://davestaxcp.gitbook.io/freewallet.io-user-manual/freewallet-functions/closing-a-dispenser

It will take 5 blocks after your close dispenser transaction confirms for the dispenser to finally close on Tokenscan

🤔🤔

Warm greetings XCP community,
We are starting a new collection; Horse themed. 21 Horse cards per series.

First 21 entrants will receive 2x each of submission token. First 100 entrants will receive a WELCOMEHORSE token.

Telegram group link
https://t.me/+IfJrVSIePZc1NWY1

LFG! 🐎🐎🐎

Nice to see this new wave of activity in counterparty.

Unfortunately, you’ll have to ask in the counterparty channel about this…. As it is an error that comes directly from counterparty and not freewallet…. And is related to the update updates in counterparty that rely on third-party software called Electrs

It just meant I had spent all muh corn 🤣🤣

Selling a full Memory Chain set (2017), only 4 exist! 150+ cards. Historic collection. ⛩️
Also if anyone wants a bulk deal to build their Rare Pepe collection. 🐸 DM me

Finally exiting? 😂 Never thought I’d see the day

Why?

why did I think I'd never see it?

Yes

I got tx for an issuance when I did it. It's been like an hour plus and it hasn't confirmed / I don't see even unconfirmed.
Thoughts....
17LV3y5KhExPdVcqS81zXuVUfNV9pmaGA

its because issuances with longform descriptions need a lot more in fees

heres your tx: https://mempool.space/tx/fe75dba9f55a1264a00a1cbd6da9c6b63faeeff8330d82e12c349cfd36d805c1

whenver you do longform issuances or longform broadcasts (especially with addresses you use often and that have many UTXOs on them) it will cost more

in these circumstances dont just pick the 'high fee' setting, do a custom fee even higher... 2x-3x the high fee works well

this tx will eventually confirm, but I do write about this 'effective fee rate' in the user manual as well

https://davestaxcp.gitbook.io/freewallet.io-user-manual/troubleshooting-issues/my-transaction-is-too-low-of-an-effective-fee-rate

is it normal that dispensers data doesn't load in gui? windows, latest

If you click around too fast you get rate limited. Wait a bit, smoke a cigarette and come back and it should be good

Question, again, thanks ahead of time to the bad ass crew of dev up in here.
I entered my seed words into sons computer because mine is Rekt.
Works great have been using it.
But today I decided id close old dispensers on secondary addresses and return all to original main.
But when I go to change addresses non of the ones that were created in freewallet with my computer seen to have imported when I am on his computer?? 🤔

Reinstalled and now running like a brand new Toyota.

Do I just hit create again and it will bring them up?

Just take guess at how many were there you figure?

Yup.
Then I added like 10 or so

So keep adding till all show up 🐸🪖👊

I only have just the one key / addy
I created all the other addys from it

Making coffee now.
Gonna get after it in just a few
🐸🪖👊☕
Thank you M

Worked.
Thanks again M

The New New

Mint 17
Giveaway 5
Sell 5 @ 3.15 XCP
Sell 5 @ 7.77 XCP
Keep 2

I'm closing dispensers for all my cards.
Burning numbers to 17 then implementing same plan to all old assets as well

Xchain Training Muh Wallet

Almost time to
https://tokenscan.io/asset/FORKWARD

S E C R E T A R V I K S